ISO 9001 Certified

Tubar Custom Hydraulics | Hydraulic Power Units

Our hydraulic power units are built to meet the daily needs of the toughest and most demanding applications. They are used in food, chemical, automobile, wash down applications, and are designed to meet your requirements and built to your specifications.

Our quality products are manufactured in a timely manner and we support our product with excellent customer service. These hydraulic power units have been used for custom built dumpers, vertical reciprocating conveyors, lifts and compactors for over 50 years. All power units are tested before shipped.

  • Welded standard and JIC (Joint Industrial Council) type
  • Fully assembled and self contained
  • TENV or TEFC including wash down motor with 110/1/60 and 220/440/3/60 Voltage. (Other voltages available)
  • Gear or Vane type pumps
  • Check and relief valve
  • Manifold with up to 4 stations
  • 4 way 3 position directional control valves
  • Sandwich type counter balance valve
  • Glycerine filled pressure gauge to monitor hydraulic system pressure
  • Pressure switch with digital read out Suction line strainer
  • Baffle plate in larger oil reservoirs
  • Reservoir capacity from 2 to 60 gallons. Reservoirs have drain plug, breather and fill cap and oil level gauge. Larger reservoirs have oil gauge with temperature indicator
  • Motors with ¾ hp to 25 hp
  • Pumps from 1.4 gpm to 20 gpm
  • Hydraulic pressure 2000 psi max
  • Adjustable relief up to 1750 psi
  • These power units can be furnished with electrical controls for NEMA 4, 4X and 12 classification

  • Tubar Custom Hydraulics | Hydraulic Cylinders

    Our hydraulic cylinders are built to meet the daily needs of the toughest and most demanding applications. They are used in food, chemical, automobile and wash down applications and are designed to meet your requirements and built to your specifications. Our quality products are manufactured in a timely manner and we support our product with excellent customer service. These hydraulic Cylinders have been used for custom built dumpers, vertical reciprocating conveyors, lifts and compactors for over 50 years. All Cylinders are tested before shipped.

    • Welded construction type
    • Fixed clevis base
    • Ductile iron piston and cap
    • External safety cap to prevent blow out of cylinder cap snap ring in case of excessive hydraulic pressure
    • Honed precision 16 RMS finished tube
    • Hard chrome and high tensile strength rod
    • Polypak seals and buna o-rings in piston and cap
    • Oillite bronze bushing for maximum wear life in rod end
    • Hard chrome base and rod end pins
    • Bore size from 2 inches to 6 inches
    • Rod size from 1 ¼ inch to 4 inches
    • Stroke up to 21 feet
    • Painted red unless otherwise specified
    • Can be furnished with chrome plated i.d. and flash chrome o.d.
    • Stainless steel rod or complete stainless steel construction available
    • Velocity check valve in base of cylinder
    • Can be furnished with dual ports in base of single acting vertical lift cylinder for quick descent