ISO 9001 Certified

TD Series | TD Series Drum Dumpers

Additional Features:

• Dump angles from 0 - 90° (except THD)

• Dump height up to 40 feet

• Capacities up to 1,500 Pounds

• Stationary and portable units

• Hydraulic powered drives on portables

• Safety enclosures

• Different finishes and materials

• Discharge valves

• High grade/wash down options

• Numerous electrical and hydraulic control options

• Air over hydraulic power unit options

• Side loading capabilities

• Special Motors and Controls


TD Series | TD Drum Dumpers

The TD Drum Dumper can be custom built to fit the customers' specific requirements. Units are available in standard dumping heights from 36 inches to 60 inches with standard load capacities from 750 to 1,200 pounds and can be designed as stationary, portable, or power-driven models. Units are equipped with adjustable locking clamps which keep the drums secure.

Tubar TD Series Dumpers are used to feed parts or material wherever needed. Units dump into receiving vessels and containers, or onto conveyors and other work surfaces.

Line power to customer’s voltage preference. Includes T.E.N.V. Motor and NEMA Controls battery-operated models include 12-volt automotive system with charger. Special motors and controls available.


TD Series | TDLS Lift and Seal Drum Dumpers

TD Drum Lift and Seal Dumpers can be ordered custom built to fit the customer’s specific requirements. Units are available in standard dumping heights up 60” with standard load capacities from 750 to 1,200 pounds and can be designed as stationary, portable or power-driven models.

Tubar TDLS Series Dumpers are used to feed parts or material where ever it is needed. Units dump into receiving vessels and containers or onto conveyors and other work surfaces.

This unit is supplied with a moveable carriage that lifts the container into a sheet metal hood, with or without a discharge valve, before dumping. This option is used for dust control and better control of product discharge.


TD Series | TDHD High Dump Drum Dumpers

The TDHD series can be ordered custom built to fit the customer’s specific requirements. Units are available in dumping heights up to 40 feet with standard load capacities from 750 to 1,200 pounds and can be designed as stationary, portable or power-driven models.

Tubar TDHD Series Dumpers are used to feed parts or material where ever it is needed. Units dump into receiving vessels and containers or onto conveyors and other work surfaces.


TD Series | TDHDLS High Dump Lift and Seal Drum Dumpers

Tubar Drum High Dump Lift and Seal Dumpers can be ordered custom built to fit the customer’s specific requirements. Units are available in standard dumping heights up 40 feet with load capacities from 750 to 1,200 pounds and can be designed as stationary, portable or power-driven models.

Tubar TDHDLS Series Dumpers are used to feed parts or material where ever it is needed. Units dump into receiving vessels and containers or onto conveyors and other work surfaces.

This unit is supplied with a moveable carriage that lifts the container into a sheet metal hood, with or with-out a discharge valve, before dumping. This option is used for dust control and better control of product discharge.


TD Series | THD Hydraulic Drum Dumpers

Tubar THD Dumpers can be specifically engineered and constructed to meet your exact needs. Completely hydraulic to provide fast, clean pouring of solids into high vats, bins, hoppers or mills. It raises the drums vertically, then arcs for dumping and pouring.

These units are available in portable or stationary models with capacities of 750 to 1,200 pounds. The dump eights are from 72" to 120" and maximum dump angle of 45°.


TD Series | TD Food Grade Drum Dumpers

Since 1952, Tubar has been building dumping equipment for food processing and packaging plants around the world for meat, vegetables, fruit, snack food and other applications.

Dumpers are designed to minimize product accumulation on structural members by using tubular structural components with capped ends. All materials used in product contact areas is 304 stainless steel with number 4 finish. Hydraulic cylinder rods are stainless, cylinder tubes are chrome plated inside and flash chrome outside. All welds are continuous. Product contact area welds are continuous and ground smooth if required. Materials which cannot be stainless are painted with USDA approved steel-it paint.

Electrical motors can be washed down motors used for the food industry. All electrical controls are NEMA 4X for corrosion resistance.

All weld splatters are removed and the unit is thoroughly cleaned before shipping. All Food Grade Dumpers are tested using food approved hydraulic oil and all grease fitting are filled with food approved grease.

The units are packaged in a way to prevent any external atmosphere effect.